- <p>主要技術參數/Main Technique Parameter  <br /> 項目 混合比 基料桶 固化劑桶 較大耗氣量 膠氣壓力比 擠膠較大工作壓力 供氣壓力 主機外形尺寸 整機重量 <br /> 參數 6:1-14:1 55加侖(200L) 5加侖(20L) 0.8立方M/min 50:1 .29Mpa 0.5-0.8Mpa 1100X950X1630mm 650kg <br />  <br /> 涂膠機設備性能概述/Machine Introduction </p> <p>GTO5型高能雙組份涂膠機，其關鍵零部件均采用世界，輔以關鍵機制部件采用優質不銹鋼經熱處理工藝精制而成，使雙組份涂膠機的可靠耐用性大大提高，確保了設備的優良品質。</p> <p>GTO5型高能雙組份涂膠機固化劑液壓系統設有兩道過濾裝置，提高了兩種組份的混合均勻性及固化性能，系統還設有管路高壓的安全保護裝置，使操作和使用更加安全。該系統為全封閉系統，杜絕了空氣混入，避免固化劑與空氣接觸而固化，確保了介質流量的穩定性。</p> <p>該涂膠機的基料泵、固化劑泵及比例泵的高壓閥口均采用零泄露特殊合金研磨制造，設有獨特方便的可調式配比機構，輔以兩種組份的比例檢測系統，較大限度地保證雙組份膠近乎苛刻的配比要求，滿足玻璃幕墻或中空玻璃膠的比例要求。</p> <p>該機混膠系統采用國際流行的靜態往復帶式混合器、進口混合芯棒，加上獨特結構的單向針閥，使混合更均勻；特殊彈性材料制造的擠膠嘴使中空玻璃的制作更加方便、簡潔、美觀。進口擠膠槍操作簡單、密封可靠。</p> <p>The GT05 high-efficiency adhesive dispensing machine, whose key parts are supplied by GRACO, has a good quality and reliability. The key functional parts are made of high-tension and quality stainless steel with thermal treatment, the reliability and durability of the machine are greatly improved, ensuring a fairly well quality of machine.</p> <p>The curing agent system of GT02 high-efficiency adhesive dispensing machine is fully closed, which prevents the agent from contacting air and therefore solidification occurs. The fluid flow rate stability is ensured and mixing effect improved. The system is also equipped with a hose overload protection device, providing more safety guard for operation.</p> <p>The material pump, curing agent pump and proportional pump high pressure valve of the machine are made of special leakage-free alloy by grinding. The proportional pump is installed with an adjustable proportioning mechanism; the nearly fastidious proportioning requirements of the bicomponent adhesive are fulfilled, as well as those of curtain wall glass and insulating glass.</p> <p>The internationally prevailing stationary reciprocating mixer is used in this machine, with the specially designed needle valve, a much better mixing result is achieved; The special material with elasticity is used to make the dispensing nozzle, the production of insulating glass is more convenient, simple and elegant. The operation of the imported dispensing gun with a reliable sealing is quite simple.</p>

濟南鴻泰涂膠設備有限公司是國內一家有經驗研發,生產雙組份涂膠設備及丁基膠涂膠設備的高新技術企業,公司經理邵于飛先生,于1999-2004年供職于德佳玻璃機器,有經驗從事雙組份涂膠機,丁基膠涂膠機的開發,設計,并于1999年7月開發出國內靠前臺人機界面控制的丁基膠涂膠機,擁有豐富的涂膠設備設計,制造經驗.公司秉承;創高等產品,做涂膠相關人士;的企業理念,高等的人才締造高等的產品.公司開發的GT型高能雙組份涂膠機,廣泛適用于雙組份硅酮結構膠,聚硫膠,聚胺脂膠等高準確配比,均勻混合和快速作業等場合,解決了手工作業帶來的高浪費低效率的現象,是理想的玻璃粘接生產設備.公司以人才,技術,服務和信譽為本,不僅為客戶提供高品質的涂膠設備,還為您提供安裝調試設備,技術咨詢指導,員工操作培訓等整體化的售后服務,免除客戶的后顧之憂.

供應GT05型高能雙組份涂膠機（雙組份打膠機）